跳到主要内容
版本:v1.0

Alluxio TieredStore Configuration

Alluxio is one of the distributed cache engines leveraged by Fluid. It supports tieredstores to store cached data in different location, for example different directories with different storage types. By appropriate configurations on tieredstores, users can get better I/O throughput from Fluid and eliminate bottlenecks when accessing data.

The guide introduces you how to configure Alluxio's tieredstore in a declarative way in Fluid.

To get more tech detail about Alluxio's tieredstore, please refer to Cache-related docs offered by Alluxio

Prerequisites

  • Fluid(version >= 0.3.0)

Please refer to Fluid installation documentation to complete installation.

Single-Tier Configuration

Here is an typical example for an AlluxioRuntime:

apiVersion: data.fluid.io/v1alpha1
kind: AlluxioRuntime
metadata:
name: dataset
spec:
...
tieredstore:
levels:
- path: /dev/shm
mediumtype: MEM
quota: 2Gi

spec.tieredstore.levels contains only one level, so Alluxio will run with single tieredstore.

A brief description for each property involved in the above-mentioned example is as follows:

  • path: where data cache actually stores
  • mediumtype: one of the three values(MEM, SSD, HDD), used to specify medium for path
  • quota: maximium cache capacity for the level

Single-Tier Multi-Directory Configuration

The best way to demonstrate such configuration is to give an example like this:

apiVersion: data.fluid.io/v1alpha1
kind: AlluxioRuntime
metadata:
name: dataset
spec:
...
tieredstore:
levels:
- path: /mnt/ssd0/cache,/mnt/ssd1/cache
mediumtype: SSD
quota: 4Gi

To use multiple directories as Alluxio's tieredstore, the only difference is to add more directories in path with comma(",") as their separator. Take the yaml above as an example, with path containing both "/mnt/ssd0/cache" and "/mnt/ssd1/cache", Alluxio will use these two directories as its cache store in the meantime.

The example also implies some best practices about when you might want to use such configuration: If there is a bottleneck introduced by storage device itself(e.g. limited by Hard disk I/O throughput), using multiple storage devices("/mnt/ssd0" and "/mnt/ssd1" in the example above) as Alluxio's tieredstore can reduce load on each device and get a higher I/O throughput.

Note: For now, Fluid only support tieredstores with homogeneous medium type. That is, it is not allowed to use different hybrid storages in a tieredstore in Fluid.

Also please note that, if multi-directory tieredstore is enabled, quota will be divided equally to each directory. Take the yaml above as an example, with quota setting to "4Gi", each directory in path will have a cache capacity of "2Gi"(i.e. 4Gi / 2)

If that's not your desired way, Fluid also provides quotaList to configure cache capacity for each directory:

apiVersion: data.fluid.io/v1alpha1
kind: AlluxioRuntime
metadata:
name: dataset
spec:
properties:
...
# [default property in fluid]
# alluxio.worker.allocator.class: alluxio.worker.block.allocator.MaxFreeAllocator
...
tieredstore:
levels:
- path: /mnt/ssd0/cache,/mnt/ssd1/cache
mediumtype: SSD
#quota: 4Gi
quotaList: 3Gi,2Gi

quotaList allows you to set maximum cache capacity for each directory. The quotaList will distributed its values into directories in the same order you defined in path, so the number of quotaList must be in consistent with the number of path. For example, with the yaml above, "/mnt/ssd0/cache" has a maximum cache capacity of "3Gi", while "/mnt/ssd1/cache" has capacity of "2Gi".

Another Alluxio property related to multi-directory tieredstore is alluxio.worker.allocator.class. All the supported values are described as follows:

  • "MaxFreeAllocator": Always try to allocate the cache to the storage directory that currently has the most availability
  • "RoundRobinAllocator": On each tier, maintain a Round Robin order of storage directories. Try to allocate the new cache into a directory following the Round Robin order, and if that does not work, go to the next lower tier.
  • "GreedyAllocator": Always try to put the new cache into the first directory that can contain it.

By default, Fluid uses "MaxFreeAllocator" to decide where to store a new cache. Users can feel free to change this behavior by setting corresponding allocator to the Alluxio property. For example, users can change alluxio.worker.allocator.class to "alluxio.worker.block.allocator.RoundRobinAllocator" to choose round robin strategy.

Multi-Tier Configuration

Here is an example for multi-tier configuration:

apiVersion: data.fluid.io/v1alpha1
kind: AlluxioRuntime
metadata:
name: dataset
spec:
...
tieredstore:
levels:
- path: /dev/shm
mediumtype: MEM
quota: 2Gi
- path: /mnt/ssd0/cache,/mnt/ssd1/cache
mediumtype: SSD
quotaList: 3Gi,2Gi

Multiple tieredstores are just tieredstores with some order. Take the yaml above as an example, we specify two tieredstores: the first level uses memory for high-speed data access and the second one uses SSD to get bigger cache capacity.

Level order defined in spec.tieredstore.levels will not affect the actual level order used by Alluxio. Before Alluxio launched, Fluid will firstly sort the levels according to mediumtype, and storages with higher I/O throughput will get higher priority. That is, Fluid will sort tieredstores in the following orders: "MEM" < "SSD" < "HDD".

Note: Alluxio uses a different way to report its capacity usage when using multi-tier configuration. For now, this will lead to some inaccuracy when showing Dataset.Cached and Dataset.CachedPercentage in Fluid.